Description
DW150 and DW150A Lab Water Purification System
Features:
1. LED display, display the system running state.
2. Automatic microcomputer controlling system.
3. Fault is detected automatically, automatic diagnosis.
4. Unique design of consumables, easy for replacement.
5. Bench top and floor stand, 2 kind installation method
6. Pipeline with NSF authorization to assure high quality ultrapure water
7. New easy-inserting adaptor to make convenience of cartridge maintaining and replacing.
8. Dual output: RO drinking water and DI water.
Specification:
Remarks:
1. Inlet water: TDS<200ppm, 25°C, 50psi and 15% recovery rate.
2. GPD=gallon per day.1gallon=3.78liters.
3. The quality of inlet water will effect pure water’s quality of outlet and cartridge’s life.
4. Output of 150 gallons per day is measured under the temperature of 25°C. When the temperature is lower than 25°C, the water output will be less than150 gallons per day.
Technical Data:
1. Model number:
DW150: standard machine
DW150A: standard machine + 12L pressure tank + 7.7L resin cartridge
2. Purification system: 10” PP filter + 150G RO Membrane + 10” x 3pcs 0.55L Resin + 9” KDF carbon filter (inside).
3. Inlet water: Tap water 5~45°C,1.0 ~ 4.0Kgf/cm2, TDS<200ppm, If inlet water TDS>200ppm, pretreatment is recommended.
4. Quality of deionized water: Resistivity: >10MΩ.cm, with 7.7L resin cartridge up to 17.5MΩ.cm.
5. Quality of RO water: TDS (Total dissolved solid, ppm, mg/l) <TDS of tap water × 5%
6. Output: 20 liters/hour at 25°C
7. Power: 220V/50Hz, or 110V/60Hz, 25W.
8. Dimension: 52cm×14cm×37cm
9. Weight: About 10Kg
Be the first to review “Lab Water Purification System DW150 DW150A”
Reviews
There are no reviews yet.