Description
NF-308 Wire Fault Locator
Features:
1. Directly hunt 5E, 6E, telephone wire, coaxial cable, USB cable and other cables.
2. Hub blink for locating network port by the flashing port light on Hub / Switch.
3. Check wiring error in 5E, 6E, coaxial cable, such as open circuit,short circuit, jumper wire, reverse connection.
4. Locate the wiring or connection error.
5. Measure cable length up to 1000m and locate the breakage point.
6. polarity test function measure DC voltage.
7. Memory and storage for calibration data.
8. Automatically time-delay shut off and Low battery alarm function.
Attention:
1.Don’t connect high voltage live lines to avoid buring out the machine.
2.Put into the right place to avoid hurting others,because of the sharp part.
3.Connected the cable to the right port.
4.Read the user manual before use it.
| NF-308 Transmitter specifications | |
| Indictor | LCD 53×25 mm, with backlight |
| Tone frequency | 225kHz |
| Max. distance of transmission | 2 km |
| Max. distance of cable map | 1 km |
| Max. working current | Less than 70mA |
| Tone mode | 2 Tones adjustable |
| Compatible connectors | RJ11，RJ45, BNC, USB |
| Max. signal voltage | 15Vp-p |
| Function selection | 3 position buttons & 1 power switch |
| Function and faults LCD display | LCD display ( wiremap, Tone, short, , No adapter, Low battery ) |
| Cable map indication | LCD (#1-#8) |
| Shielded indication | LCD ( #9) |
| Battery Type | DC9.0V（NEDA 1604/6F22 DC9V x 1pcs） |
| Dimension(LxWxD) | 185x80x32mm |
| NF-308 Receiver specifications | |
| Frequency | 225kHz |
| The Max. working current | Less than 70mA |
| Earjack | 1 |
| LED illumination | 2 |
| Battery Type | DC9.0V（NEDA 1604/6F22 DC9V) x1pc |
| Dimension(LxWxD) | 218x46x29 mm |
| NF-308 Remote unit specifications | |
| Compatible connectors | RJ45, BNC |
| Dimension(LxWxD) | 107x30x24mm |
Reviews
There are no reviews yet.