Cari kata kunci alat ukur lainnya:

NF-611 HDMI Cable Tester

NF-611 HDMI Cable Tester

SKU: DI01474 Category: Tag:


NF-611 HDMI Cable Tester

1. Fast and accurate verification with type A – A, A – C and C – C connectors.
2. Check miswires, short, open and cross status of HDMI cables.
3. Mapping continuity and proper configuration.
4. Displays 19 pin-to-pin and shield connection status on both main and remote unit.
5. Adjustable test modes:Fast/slow scan/manual test for step by step.
6. Design with loopback function.
1.Don’t connected high voltage lines to avoid buring out the machine.
2.Put into the right place to avoid hurting others,because of the sharp part.
3.Connected the cable to the right port.
4.Read the user manual before use it.

 Cables versions support  HDMI cables with type A & C connectors conforming to 1.0,1.1,1.2,1..2a,
 1.3,1.3a,1.3b,1.4,1.4a,Category 1 and category 2 HDMI cables
 Support test  19 pin to pin wiremap and shielding detection
 Test interface of master unit  HDMI ( type A) x1, Mini HDMI (type A ) x1
 Test mode  Fast / slow scan / step by step
 Test distance  Under 50 meters
 Status Display  19 leds and shield led on both master and remote unit
 Beeper indication  Yes
 Low battery indication  6.0V
 Power source  DC 9V (NEAD 1604/ 6F22) x1 (not included)
 Environment  Operating:0 to 40 < 80% RH
 Storage:-10 to 50 <70%RH
 Dimensions  Master unit:103x66x27mm
 Remote unit:103x35x27mm

 Name  HDMI cable tester
 Model  NF-611
 Wire map  19 pin+Shield 
 Cable type  A-A, A-C, C-A
 Test type  Master+Remote
 Status display  No
 Test distance  < 50 meters
 Low battery indication  Yes
 Test mode  Fast/slow/step by step
 Battery  9 V


There are no reviews yet.

Be the first to review “NF-611 HDMI Cable Tester”

Your email address will not be published. Required fields are marked *

Close Menu
Shopping Cart