Cari kata kunci alat ukur lainnya:

QRAE 3 PGM-2500 PGM-2500P RAE Systems LEL H2S CO O2 Multigas Monitor

QRAE 3 PGM-2500 PGM-2500P RAE Systems LEL H2S CO O2 Multigas Monitor

SKU: DI00663 Category: Tag:


QRAE 3 PGM-2500 RAE Systems LEL H2S CO O2 Multigas Monitor
Order Number: 
1. PGM-2500   (Diffusion Type)
2. PGM-2500P (Pumped type)
Confined space entry and general safety and compliance in:
1. Industrial safety
2. Oil and gas
3. Fireground “Toxic Twins” detection
4. Environmental
5. Fire and Emergency response
QRAE 3 is a wireless compact monitor for one to four gases.
The QRAE 3 provides detection and monitoring of Oxygen (O2), Combustibles, and toxic gases that include Hydrogen Sulfide (H2S), Carbon Monoxide (CO), Sulfur Dioxide (SO2). QRAE 3 can deliver wireless real-time instrument readings and alarm status 24/7. This provides better incident visibility and can improve response time.
1. Man Down Alarm with real-time remote wireless notification
2. Easy maintenance with fieldreplaceable sensors and pump
3. Fully automated bump testing and calibration with AutoRAE
4. Pumped or diffusion models available
5. Large graphic display can rotate 180°
1. Available in Diffusion or Pumped version
2. IP-65/67 water- and dust-resistant case
3. Strong, protective, concussion-proof design
4. Real-time gas concentration readings and alarm status enabled by state-ofthe-art wireless technology
5. Unmistakable five-way local and remote wireless notification of alarm conditions
6. Large graphical display icon-driven user interface through intuitive, simple-tooperate two-button user interface.
7. Multi-language support: 18 languages encoded
8. Easy access to pump, sensors, filter and battery compartment
9. Device Management with Honeywell SafetySuite
1. Size: Diffusion: 5.5 “H x 3.2 “W x 1.5” W (140 x 82 x 42mm); Pumped: 5.7 “H x 3.2 “W x 1.7” D (145 x 82 x 42mm)
2. Weight: Diffusion: 12.9 oz (365g with Li-ion battery and clip); Pumped: 14.5 oz (410g with Li-ion battery, clip, and external filter)
3. Sensors: Up to four field-replaceable sensors: 
  1) LEL: Catalytic bead for combustibles (built-in Correction Factor library)
  2) Oxygen: Liquid electrolyte O2
  3) Toxic: electrochemical for H2S, CO
4. BATTERY Rechargeable Li-ion
  1) 14 hours continuous non-wireless, diffusion
  2) 11 hours continuous non- wireless, pumped
  3) 10 hours continuous with wireless, diffusion
  4) 8 hours continuous with wireless, pumped
Note: All battery specifications at 68° F (20° C); lower temperatures and alarm conditions will affect runtime.
  1) Monochrome graphic display (128 x 80)
  2) Display size: 1.57″ W x 1.06″ H (40 x 27mm) with backlighting
  3) Automatic or on-demand screen rotation
7. KEYPAD: Two-button operation
  1) Real-time reading of gas concentrations
  2) Battery status
  3) Pump status (if equipped with pump)
  4) Wireless on/off and wireless reception quality
  5) STEL, TWA, peak, and minimum values
  6) Man Down and policy enforcement indicators
  1) Multi-tone 95dB buzzer (at 11.8″/ 30 cm, typical), vibration alarm, and flashing red LEDs and on-screen indication of alarm conditions
  2) Alarms: latching, non latching or manual override
  3) Additional diagnostic alarm and display message for low battery
  4) Pump stall alarm (pumped version only)
  5) Man Down Alarm with pre-alarm and real-time remote wireless notification
  6) Continuous datalogging (3 months for 4 sensors at 1-minute intervals, 24/7)
  7) User-configurable datalogging intervals (from 1 to 3,600 seconds)
  1) Data download and instrument set-up and upgrades on PC via Travel Charger
  2) Wireless data and status transmission via built-in RF modem (optional)
11. WIRELESS NETWORK: Mesh RAE Systems Dedicated Wireless Network
12. WIRELESS FREQUENCY AND APPROVALS4: ISM license free band, 868Mhz or 900Mhz; FCC Part15, CE R&TTE, ANATEL
  1) EchoView Host: LOS > 650ft (200m)3
  2) ProRAE Guardian and RAEMesh Reader: LOS > 650ft (200m)3
  3) ProRAE Guardian and RAELink3 Mesh: LOS > 330ft (100m)3
14. EM IMMUNITY: EMI and ESD test: 100MHz to 1GHz 30V/m, no alarm; Contact: ±4kV; Air: ±8kV, no alarm
15. IP RATING Pumped: IP-65; Diffusion: IP-67
16. CALIBRATION: Two-point calibration for zero and span (manual, or automatic with AutoRAE 2)
17. SAMPLING PUMP: Built-in pump or diffusion, can sample through tubing up to 98ft (30m)
18. HAZARDOUS AREA APPROVAL: US and Canada: classified for use in Class I, Division 1, Groups A, B, C and D; Europe: IECEx/ATEX (II 1G Ex ia IIC T4)
19. TEMPERATURE: -4° to 122°F (-20° to 50°C) for T4 temperature code
20. HUMIDITY: 0% to 95% relative humidity (non-condensing)
21. LANGUAGES: Arabic, Chinese, Czech, Dutch, English, French, German, Indonesian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Russian, Spanish, and Swedish (language must be changed through ProRAE Studio II)
  1) OXYGEN (O2): 0 to 30.0%
  2) COMBUSTIBLE: 0 to 100% LEL
  3) CARBON MONOXIDE (CO): 0 to 500ppm
  4) HYDROGEN SULFIDE (H2S): 0 to 100ppm


There are no reviews yet.

Be the first to review “QRAE 3 PGM-2500 PGM-2500P RAE Systems LEL H2S CO O2 Multigas Monitor”

Your email address will not be published. Required fields are marked *

Close Menu
Shopping Cart